§ 68-304. Property development zoning regulations.

(a)

Generally. Property development zoning regulations as expressed through lot and bulk requirements are as indicated within section 68-431. Yard requirements, setbacks, height regulations, impervious surface requirements, parking and other lot and zoning regulations are contained in separate sections of this chapter.

(1)

The maximum impervious surface ratio (ISR) shall be 0.95. The maximum floor area ratio (FAR) shall be 1.2. Residential dwellings shall be exempt from the FAR and ISR requirements.

(2)

Hotel/motel uses shall not exceed a density of 50 units per acre. Tourist dwellings, as defined in section 68-2, and residential dwellings of all types shall be limited to a maximum density of 15 units per acre. Hotel/motel "residence" suites, which may have full kitchens, shall not be considered tourist dwellings for the purpose of this regulation.

(b)

Other standards. Public/semi-public and/or ancillary nonresidential use shall not exceed a maximum area of three acres. Any such use, alone or when added to existing contiguous like uses, which exceed this threshold shall require a future land use map amendment and be rezoned to include such use and all contiguous like uses.

(Ord. No. 95-10, § 36-204, 9-19-95; Ord. No. 00-08, § 26, 1-9-01; Ord. No. 02-06, § 3, 10-22-02; Ord. No. 03-04, § 3, 6-10-03; Ord. No. 15-03, § 3, 7-7-15 )

Editor's note

Ord. No. 15-03, § 3, adopted July 7, 2015 , amended § 68-304 to read as set out herein. Previously § 68-304 was titled "Property development regulations."